FREE SHIPPING IN THE CONTIGUOUS U.S.A.! The FHX-V torsion spring horizontal plate clamp is designed for lifting and transporting steel plates and other non-deflecting materials. Jaw openings are available from 0" - 2.36".
Plate Clamp Features:
When using FHX-V clamps, two must always be used together
Heavy duty welded body clamp
Pretensioned spring cam feature for easy single operator usage
Clamp can be closed and fixed on any desired spot
Compact and lightweight design for easy handling
Warnings:
MINIMUM load must be 10% of rated capacity.
Always read the manual before using a clamp.
Check whether the working load limit (WLL) of the clamp is sufficient for the load created in the lifting situation. Note: The working load limit (WLL) is shown on the lifting clamp.
Make sure that coupling links and shackles are large enough to allow the clamp to move freely in the hook.
Place the jaws as far as they will go over the plate, making sure that the clamp is positioned so as to balance the load when it is being lifted.
Ensure that the load is in a stable position.
Always keep your distance during lifting and descending of a load.
Prevent situations that anybody is under the load.
Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp.
For additional information on the FHX-V or other horizontal plate clamps, please call our Sales Representative at 800-242-3477 or email us at csr@wiscolift.com.
