FREE SHIPPING IN THE CONTIGUOUS U.S.A.! The FHX-V torsion spring horizontal plate clamp is designed for lifting and transporting steel plates and other non-deflecting materials. Jaw openings are available from 0" - 2.36".
Plate Clamp Features:
-
When using FHX-V clamps, two must always be used together
-
Heavy duty welded body clamp
-
Pretensioned spring cam feature for easy single operator usage
-
Clamp can be closed and fixed on any desired spot
-
Compact and lightweight design for easy handling
Warnings:
-
MINIMUM load must be 10% of rated capacity.
-
Always read the manual before using a clamp.
-
Check whether the working load limit (WLL) of the clamp is sufficient for the load created in the lifting situation. Note: The working load limit (WLL) is shown on the lifting clamp.
-
Make sure that coupling links and shackles are large enough to allow the clamp to move freely in the hook.
-
Place the jaws as far as they will go over the plate, making sure that the clamp is positioned so as to balance the load when it is being lifted.
-
Ensure that the load is in a stable position.
-
Always keep your distance during lifting and descending of a load.
-
Prevent situations that anybody is under the load.
-
Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp.
For additional information on the FHX-V or other horizontal plate clamps, please call our Sales Representative at 800-242-3477 or email us at
csr@wiscolift.com.