Crosby IPSC10 Screw Clamps for Positioning and Turning

$ 796.91 Sale

Screw Clamps suitable for use in positioning & turning steel plates and sections. Not to be used as a lifting clamp.

The IPSC10 screw style clamp is for positioning, pulling and turning plates or fabrications.

  • Available in capacities of 1.5 and 3 metric tons.
  • Jaw openings available: 0” to 2.36”.
  • Suitable for steel with a surface hardness up to 30 Rc.
  • Forged alloy steel body for strength and smaller size. Forged alloy components, where required.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
  • Each product is individually serialized, with the serial number and Proof Load test date stamped on body.
  • User manual with test certificate is included with each clamp
  • Manufactured by an ISO 9001 facility.
 
The IP5000 Stinger Assembly is designed to be used as a connecting link between the clamp and the hoist hook. NOT to be used as a chain sling.
  • Available in three sizes for the IP10 and IPU10 with capacities from .5 to 12 metric tons.
  • Assembly consists of welded alloy master link, Grade 80 chain and A-1337 Lok-A-Loy for attachment to the clamp hoisting eye.
  • Individually Proof Tested to 2.5 times the Working Load Limit of Grade 80 chain
  • with certification.
  • Company name or logo and frame number permanently stamped on link.
  • Locking system provides for simple assembly - no special tools needed.
  • Finish - Red Paint.
  • Manufactured by an ISO 9001 facility.
For more information, please contact our Material Handling Specialists at 800-242-3477 or email us at csr@wiscolift.com.
Go to full site